Whirlpool RF360BXE Setting The Controls, Using The Self-Cleaning Cycle, Press, You See, Start

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS

1.Press the auto clean pad.

The clean indicator light will light up.

This will automatically set a 41⁄2-hour Self-Cleaning cycle.

NOTE: There will be a 30-minute cool-down 1⁄2 hour before the cycle is over.

PRESS YOU SEE ON

AUTO

CLEAN

2.Start the oven.

NOTE: The on indicator light will light up and the close door indicator light will flash if the door is not closed.

PRESS YOU SEE ON

START

ENTER

5 SEC

3. After Self-Cleaning cycle starts:	YOU SEE	ON
The door locked indicator light will light up when
the oven door locks. The door cannot be opened
when the door locked indicator light is on.

4. After Self-Cleaning cycle ends and the oven	YOU SEE	ON
reaches normal baking/roasting temperatures:
The clean, door locked, and on indicator lights
will go out.
Press the off/cancel pad to clear the display.	PRESS

OFF

CANCEL

5.After the oven cools to room temperature, wipe off any residue or ash with a damp cloth or sponge.

If needed, touch up spots with a mild abrasive cleanser or cleaning sponge.

26