Whirlpool SF310PEA, SF330PEA warranty Lift-upcooktop, Surface burners, Personal Injury Hazard

Lift-up cooktop

1.Remove surface burner grates and reflector pans.

2.Lift front of cooktop at both front corners until the support rods lock into place.

I

Personal Injury Hazard

Be sure both support rods are fully extended and in the locked position.

Failure to do so could result in per- sonal injury from the cooktop acciden- tally falling.

r Product Damage Hazard Do not drop the cook-top.

Damage could result to the porcelain and the cooklop frame.

3.Wipe with warm, soapy water. Use a soapy steel-wool pad on heavily soiled areas.

4.To lower the cooktop, lift cooktop from both sides while pressing the support rods back to unlock them. Lower the cooktop into place.

Replace reflector pans and surface burner grates.

Surface burners

1.Lift up the cooktop, following the instructions above.

2.Before cleaning, remove screws that hold each of the burners in place. The screws prevent the burners from moving during shipment. Remove the shipping screws with a Phillips screwdriver and lift the burners up and out. This separates the burners from the mounting bracket under each burner pair.

3.Wipe off surface burners with warm, soapy water and a sponge after each use. To remove cooked-on food, soak the burners in a vinegar and water solution for 20-30 minutes. Scrub with a plastic scrubbing pad.

4.If ports are clogged, clean with a straight pin. DO NOT enlarge or distort the ports. DO NOT use a toothpick to clean the ports.

17