Surface burners
1.Remove the cooktop, following the instructions on page 33.
2.Wipe off surface burners with warm, soapy water and a sponge after each use. To remove
3.If ports are clogged, clean with a straight pin. DO NOT enlarge or distort the ports. DO NOT use a toothpick to clean the ports.
Typical surface burner flame at highest setting
4.Occasionally check the burner flames for proper size and shape as shown. A good flame is blue in color. If flames lift off ports, are yellow, or are noisy when turned off, you may need to clean the burners (see above), or call a qualified technician for adjustment.
5.Replace cooktop.
Cleaning chart
Use the following table to help you clean your range.
PART | WHAT | TO USE |
Control | Sponge | and |
knobs | warm, | soapy |
| water |
|
Control | Sponge and | |
panels | warm, | soapy |
| water |
|
| OR |
|
| Paper | towel and |
| spray | glass |
| cleaner | |
HOW TO CLEAN
lTurn knobs to OFF and pull straight away from control panel.
l Wash, rinse, and dry thoroughly. Do not soak. l Do not use steel wool or abrasive cleansers.
They may damage the finish of the knobs.
lReplace knobs. Make sure all knobs point to OFF.
lWash, wipe with clean water, and dry thor- oughly.
l Do not use steel wool or abrasive cleansers. They may damage the finish.
lDo not spray cleaner directly on panel. Apply cleaner to paper towel.
NOTE: Make sure you have not turned the oven on when cleaning oven control panel. If you have, press the Oven Off button.
34
