Setting the controls
To start cleaning immediately:
1. Make sure the clock is set to the correct time of day.
(See “Setting the clock” on page 14.)
2.Move the Lock Lever all the way to the right -the Clean position.
3.Press the Self-Clean button.
A 3-hour Self-Cleaning cycle will be set automatically.
NOTE: If the Self-Clean button is pressed when the door is not latched, “door”will appear on the large display. Move the Lock Lever all the way to the right to latch the door. If any other command button is pressed when the door is latched, “door” will appear on the large display and you will be unable to continue. Move the Lock Lever back to the left to unlatch the door after the LOCK Indicator Light goes off.
To delay the start:
1. Make sure the clock is set to the correct time of day.
(See “Setting the clock” on page 14.)
2.Move the Lock Lever all the way to the right -the Clean position.
