USING YOUR RANGE

THE ELECTRONIC OVEN CONTROL

Electronic ON

SELF-CLEANING OVEN

display

HEAT BAKE BROIL LOCK'D CLEAN TIMER

Oven selector pads

(pp. 13, 15, 16, 17, 22)

 

 

 

 

 

TIMER

 

 

 

 

 

BAKE

CUSTOM

AUTO

TEMP

CLOCK

SET

LIGHT

HR

MIN

START

OFF

 

BROIL

CLEAN

 

 

TIMER

 

 

 

ENTER

CANCEL

 

 

 

 

 

OFF

 

 

 

5 SEC

 

Temperature

Clock

Minute

Oven

Hour

Minute

Start/enter

pad

 

pad

timer set

light

pads

pads

pad

 

(pp. 13, 15,

(p. 11)

and off

pad

(p. 11,

(p. 11,

(pp. 10, 11,

16, 17, 22)

 

pads

(p. 28)

21)

21)

12, 14, 16,

 

 

 

(pp. 11, 12)

 

 

 

22)

Off/cancel pad

(pp. 12, 14, 16, 22)

Display/clock

When you first plug in the range, everything on the display will light up for 1 to 2 seconds, then a time of day and “PF” will appear on the temperature display. Press the off/cancel pad to clear “PF” from the display. If, after you set the clock (see the “Setting the clock” section), “PF” again appears on the display, your electricity was off for a while. Reset the clock, if needed.

When you are not using the oven, the display will show the time of day.

When you are using the oven or minute timer, the display will show times, temperature settings, and what command pads have been pressed.

When showing the time of day, the display will show the hour and minutes.

When you are using the minute timer, the display will show minutes and seconds in the following sequence:

For settings from 1-59 minutes, the display will count down each second.

For settings 1 hour or over, the display will count down hours and minutes.

Using the control lock

The control lock lets you shut down the control panel command pads. The control lock comes in handy when you want to prevent others from using the oven.

NOTES:

You can only use the control lock when the oven is not in use or the control has not been set.

Set the control lock when cleaning the control panel to prevent yourself from accidentally turning on the oven.

The control lock will stay on even after a power failure.

To lock the control panel:

Press and hold START/ENTER for 5 seconds. You will hear a single tone and “Loc” and

START “LOCK’D” will appear on the temperature ENTER display.

5 SEC

To unlock the control panel:

Press and hold START/ENTER for 5 seconds.

You will hear 3 tones followed by a single START tone. “Loc” and “LOCK’D” will disappear

ENTER

from the temperature display.

5 SEC

 

10

Page 10
Image 10
Whirlpool SF387LEG, SF385PEG warranty Electronic Oven Control, Display/clock, Using the control lock