Whirlpool SF387LEG Using Your Range, Using The Surface Burners, wWARNING, Using the control knobs

Models: SF385PEG SF387LEG

1 33
Download 33 pages 54.98 Kb
Page 6
Image 6
USING YOUR RANGE

USING YOUR RANGE

USING THE SURFACE BURNERS

wWARNING

Fire Hazard
Do not let the burner flame extend beyond the edge of the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death or fire.
Using the control knobs

Your range comes with electric ignitors. Electric ignitors automatically light the burners each time you turn the control knobs to LIGHT.

Place a filled pan on the burner grate before turning on the surface burner. Do not operate a burner for extended periods of time without having cookware on the grate.

Push in the control knob and turn it counter- clockwise to the LIGHT position. The clicking sound is the ignitor sparking. Make sure the burner has lit.

To stop the clicking

sound after the burner lights, turn the control

knob to the cook setting you want. You can set the control

knob anywhere between HIGH and LOW.

NOTE: All four electric ignitors will click at the same time. However, the burner with the control knob turned to LIGHT is the one that will ignite.

Burner heat settings

Use the following chart as a guide.

SETTING
RECOMMENDED USE
LIGHT

To light the burner.

POWER™Burner

To provide highest heat

(left front burner)

setting.

HIGH

To start food cooking.

 

To bring liquid to a boil.

Mid-range

To hold a boil.

(between HIGH

To fry chicken or pancakes.

and LOW)

For gravy, pudding, and icing.

 

To cook large amounts of

 

vegetables.

LOW

To keep food warm.

 

To simmer.

ACCUSIMMER™

To provide lowest

setting

simmer/heat setting.

(right rear burner)

To melt chocolate or butter.

NOTE: Do not leave empty cookware, or cookware which has boiled dry, on a hot surface burner. The cookware could overheat, causing damage to the cookware or cooking product.

Using POWER Burner

POWER Burner is an adjustable setting for the left front burner which provides an ultra-high heat setting. It can be used to rapidly bring liquid to a boil and to cook large quantities of food.

Using ACCUSIMMER

ACCUSIMMER is an adjustable setting for the right rear burner. It allows more accurate simmer control at the lowest setting.

Easy ways to save energy

To help shorten your cooking time, use the least amount of liquid possible.

Preheat your pots and pans only when recommended and for the shortest time possible.

Start your food on a higher heat setting, then turn the control to a lower setting to finish cooking.

6

Page 6
Image 6
Whirlpool SF387LEG Using Your Range, Using The Surface Burners, wWARNING, Using the control knobs, Burner heat settings