Whirlpool SF385PEG, SF387LEG The Oven Vent, The Storage Drawer, Removing the storage drawer

Models: SF385PEG SF387LEG

1 33
Download 33 pages 54.98 Kb
Page 19
Image 19
THE OVEN VENT

USING YOUR RANGE

THE OVEN VENT

Hot air and moisture escape from the oven through a vent that is near the middle of the backguard. The vent lets air circulate properly. Be careful not to block the vent, or you will get poor baking/roasting results.

NOTE: Never store plastics, paper, or other items that could melt or burn near the oven vent, or any of the surface burners.

THE STORAGE DRAWER

Use the storage drawer to store cookware. You can remove the drawer to make it easier to clean under the range.

Removing the storage drawer:

1.Empty the drawer before you remove it. Pull the drawer straight out to the first stop. (The stops are small, round objects formed in the slide rail.

They keep the drawer from sliding all the way out.) Then lift the front of the drawer and pull it out to the second stop.

2. Lift the back of the drawer slightly and slide it all the way out.

Replacing the storage drawer:

1. Position the drawer so that the lower drawer guides rest just inside the front frame lip.

2. Lift the front of the drawer and push it in until the metal stops on the drawer slide rails clear the upper drawer guides. Then slide the drawer closed.

Lower slide rail (inside drawer

opening) Upper drawer guides

(on inside walls)

Drawer slide rail

Lower drawer guide

19

Page 19
Image 19
Whirlpool SF385PEG, SF387LEG The Oven Vent, The Storage Drawer, Removing the storage drawer, Replacing the storage drawer