Whirlpool WHES48 Set Language, Set Contrast, Programming Your E-ZTouch Water Softener

Models: WHES48

1 29
Download 29 pages 8.52 Kb
Page 14
Image 14
Programming Your E-Z Touch Water Softener

Programming Your E-Z Touch Water Softener

SET LANGUAGE

When the softener’s electronic control is first powered up, the setup procedure prompts you to set the lan- guage (See Page 12). To change the language:

1. Press the SETUP button on the softener status screen (See Figure 22).

SET CONTRAST

The contrast of the softener’s display screen may be adjusted to optimize its readability. Depending on the ambient lighting conditions, you may want to increase or decrease the contrast from the medium level that is the default when the electronic control is first powered up. To change the contrast:

1. Press the SETUP button on the softener status screen (See Figure 22).

2. Press the LEFT ( ) button twice to display the screen shown in Figure 25.

FIG. 22

2. Press the LEFT ( ) button to display the screen shown in Figure 23.

FIG. 23

FIG. 24

3. Press the LANGUAGE button and the display will change to show the Select Language screen (See Figure 24).

4. Press the button next to the desired language. When the desired language is checked, press the OK button.

5. To return to the softener status screen, press the RETURN ( ) button.

TO SET THE SOFTENER TO ENGLISH IF ANOTHER LANGUAGE IS DISPLAYED:

If the softener status screen is not showing, press the RETURN ( ) button a few times. On the sta- tus screen, press the PRGM button. Press the LEFT ( ) button, then press the large IDIOMA or LANGUE button. Press the button next to ENGLISH, then press the OK button. Press the RETURN ( ) button to return to the status screen.

FIG. 25

3. Press the ADVANCED SETUP button. The display will change to the following screen.

FIG. 26

4. Press the LEFT ( ) button twice to display the screen shown in Figure 27.

FIG. 27

FIG. 28

5. Press the SET CONTRAST button and the display will change to show the Set contrast screen (See Figure 28).

6. Press the UP ( ) or DOWN ( ) buttons to increase or decrease the contrast. When the preferred con- trast is reached, press the RETURN ( ) button.

7. To return to the softener status screen, press the RETURN ( ) button twice.

14

Page 14
Image 14
Whirlpool WHES48 operation manual Set Language, Set Contrast, Programming Your E-ZTouch Water Softener