Specifications & Dimensions
|
| Model WHES48 |
Model Code |
| EZ 48 |
Rated Softening Capacity (Grains @ Salt Dose) |
| 14,300 @ 2.8 lbs. |
| 37,900 @ 10.5 lbs. | |
Rated Efficiency (Grains/Pound of Salt @ Minimum Salt Dose) | 48,000 @ 18.1 lbs. | |
5,107 @ 2.8 lbs. | ||
Water Used During Regeneration @ Minimum Salt Dose | 3.0 gal./1,000 grains | |
Total Water Used Per Regeneration @ Maximum Salt Dose | 44.2 gallons | |
Rated Service Flow Rate |
| 11.9 gpm |
Amount of High Capacity Ion Exchange Resin |
| 1.33 cu. ft. |
Pressure Drop at Rated Service Flow |
| 15 psig |
Water Supply Max. Hardness |
| 160 gpg |
Water Supply Max. Clear Water Iron |
| 12 ppm* |
Water Pressure Limits (minimum / maximum) |
| 20 - 125 psi** |
Water Temperature Limits (minimum / maximum) |
| 40 - 120 °F |
Minimum Water Supply Flow Rate |
| 3 gpm |
Maximum Drain Flow Rate |
| 2.0 gpm |
Salt Storage Capacity |
| 200 lbs. |
*Capacity to reduce clear water iron is substantiated by WQA test data. State of Wisconsin | ||
requires additional treatment if water supply contains clear water iron exceeding 5 ppm. | ||
**Canada working pressure limits: 1.4 - 7.0 kg/cm2. |
|
|
These systems conform to NSF/ANSI 44 for the specific performance claims as verified | ||
and substantiated by test data. |
|
|
The efficiency rating is only valid at the stated salt dose. These softeners were efficiency | ||
rated according to NSF/ANSI Standard 44. |
|
|
Variable Salt Dose: The salt dose is selected by the electronic controls at regeneration | ||
time based on the amount needed. |
| |
19” |
|
|
IN |
|
|
18” |
| |
OUT |
|
|
IN – OUT |
|
| |
|
FIG. 1
Questions? Call Toll Free
or visit www.ecodynewatertreatment.com
When you call, please be prepared to provide the model, date code and serial number, found on the rating decal, typically located on the rim below the salt lid hinges.
3