Whirlpool WHES48 operation manual Set Units, Volume Units, Time Format, Hardness Units, Fig

Customizing Features / Options

SET UNITS

The softener can be set to display values such as vol- ume and water hardness in either English or Metric units. In addition the clock may be set to display time in either 12-hour (AM/PM) or 24-hour format.

VOLUME UNITS

To select between gallons and liters as volume units:

1. Press the SETUP button on the softener status screen.

2. Press the LEFT ( ) button twice to display the screen shown in Figure 69.

TIME FORMAT

To select between 12-hour (AM/PM) and 24-hour time format:

1-5. Go to the Volume units screen by following Steps 1-5 in “Volume Units” in the previous col- umn.

6. Press the RIGHT ( ) button to display the Time format screen (See Figure 73).

FIG. 69

3. Press the ADVANCED SETUP button. The display will change to the following screen.

FIG. 70

4. Press the RIGHT ( ) button twice to display the screen shown in Figure 71.

FIG. 71

5. Press the SET UNITS button and the display will change to show the Volume units screen (See Figure 72).

FIG. 72

6. Press the button next to the desired volume units and then press the RETURN ( ) button.

7. To return to the softener status screen, press the RETURN ( ) button twice.

FIG. 73

7. Press the button next to the desired time format and then press the RETURN ( ) button.

8. To return to the softener status screen, press the RETURN ( ) button twice.

HARDNESS UNITS

To select between grains and ppm (parts per million) as water hardness units:

1-5. Go to the Volume units screen by following Steps 1-5 in “Volume Units” in the previous col- umn.

6. Press the LEFT ( ) button to display the Hardness units screen (See Figure 74).

FIG. 74

7. Press the button next to the desired hardness units and then press the RETURN ( ) button.

8. To return to the softener status screen, press the RETURN ( ) button twice.

21