Whirlpool YMT9114SF PROBLEM The turntable will not turn, You do not hear the Programming Tone

Models: YMT8118SE YMT8076SE YMT8078SE YMT8116SE MT9114SF MT8116XE MT8118XE YMT9114SF

1 96
Download 96 pages 52.16 Kb
Page 40
Image 40
PROBLEM

PROBLEM

The turntable will not turn

The display shows a time counting down but the oven is not cooking

You do not hear the Programming Tone

The fan seems to be running slower than usual

The display shows ‘I:”

CAUSE

l The turntable is not correctly in place. Make sure the turntable is correct-side up and is sitting securely on center shaft.

l The support is not operating correctly. Remove turntable and restart oven. If turntable support does not move, call an autho- rized Whirlpool service technician for repair. Cooking without the turntable can give you poor results.

lThe oven door is not closed completely.

lYou have set the controls as a kitchen timer. Touch OFF/ CANCEL to cancel the Minute Timer.

l The command is not correct.

lThe oven has been stored in a cold area. The fan will run slower until the oven warms up to normal room temperature.

l There has been a power interruption. Reset the clock.

If none of these items was causing your problem, see the “Requesting Assistance or Service” section.

40

Page 40
Image 40
Whirlpool YMT9114SF PROBLEM The turntable will not turn, You do not hear the Programming Tone, The display shows ‘I:”