General Specifications

The Wilton Models 3400 and 3410 cut-off band saws are designed for high production cut-off work. Four cutting speeds and a hydraulic feed control allows the efficient cut- ting of virtually any material.

A removable table also allows the saw to function as a vertical band saw.

The Model 3410 is equipped with an optional coolant system which can greatly extend blade life and speed the cut- ting of a variety of materials which are best cut with cutting fluids and coolants.

The Model 3400 is not equipped with a coolant system. However, the coolant system is available as an add-on kit for customer installation.

4

Specifications:

Cutting capacity

7 in. (178mm) round bar stock or tubing

 

9 1/2 in. wide x 7 in. high (240 x 178mm) rectangular stock

 

12 in. wide x 1 in. high (305 x 25.4mm) flat stock

Blade speeds

3 3/4 in. wide x 6 in. high (95.3 x 150mm) at 45 degree angle

80, 130, 180 and 265 SFM -- belt selectable

Blade drive

Heat treated steel worm pinion driving a bronze

 

worm ring gear in an oil bath

Motor

3/4 HP, 1725 RPM, 115/230V, single phase, capacitor start

Blade guides

Side: Eccentric shaft with sealed ball bearings

 

Rear: Sealed ball bearing

Blade size

3/4 x .032 x 93 in.

Blade wheels

11 7/16 in. (280.56mm) diameter flanged cast iron

Dimensions (LWH)

50 x 18 x 41 in. (1270 x 457 x 1041mm) in lowered position

Weight

275 lbs. (125kg)

Wet cutting package

1 gallon (4.4L) capacity tank with 3GPM (13L/M) pump -- Optional wet kit

 

Part No. 5635500 includes tank with baffle, pump 120V/240V, hoses,

 

flexible nozzle, shut-off valve and required electrics. This kit is delivered

Vertical saw operation

installed on Model 3410 saws.

9 1/2 x 10 in. (241 x 254mm)

Table size (LW)

Page 4
Image 4
Wilton 3400, 3410 manual Wet cutting package, Vertical saw operation