I M P O R T A N T I N F O R M A T I O N
IMPORTANT NOTE: This installation must be completed by a qualified installer, service agency or gas supplier.
•INSTALLER: please retain these instructions for local inspector’s reference, then leave them with the homeowner.
•Please read the entire installation instructions prior to installation.
•HOMEOWNER: please read and keep these instructions for future reference.
•Please read the entire Wolf Dual
Fuel Ranges Use & Care Information book prior to use.
As you follow these installation instructions, take particular note of the CAUTION and WARNING symbols when they appear. This information is important for the safe and efficient installation of Wolf Dual Fuel Ranges.
CAUTION
signals a situation where minor injury or product damage may occur if you do not follow instructions.
WARNING
states a hazard that may cause serious injury or death if pre- cautions are not followed.
In addition, the printed instructions may signal an IMPORTANT NOTE, which highlights information that is especially important for a problem- free installation.
This appliance must be installed in accordance with all National Electrical Codes, as well as all state, municipal and local codes. The correct voltage, frequency and amperage must be supplied to the appliance from a dedicated, grounded circuit that is protected by a properly sized circuit breaker or time delay fuse. The proper voltage, frequency, and amperage ratings are listed on the product rating plate.
Record the model and serial numbers before installing the range. Both numbers are on the rating plate, located on the bottom of the control panel assembly just above the oven door on the far right.
Model #
Serial #
2
