W O L F PRO WALL VENTILATION H O O D S
I N S TA L L AT I O N R E Q U I R E M E N T S
IMPORTANT NOTE: This installation must be completed by a qualified installer or Wolf authorized service center technician.
Installer: Please read the entire Installation Instructions prior to installation. Save these instructions for the local inspector’s refer- ence, then leave them with the homeowner.
Homeowner: Please read and keep these instructions for future reference and be sure to read the entire Use & Care Information prior to use.
Any questions or problems about the installation should be directed to your Wolf dealer or Wolf Appliance Company, Inc. at
IMPORTANT NOTE: This appliance must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes. The correct voltage, frequency and amperage must be supplied to the appliance from a dedicated, grounded circuit which is protected by a properly sized circuit breaker or time delay fuse. The proper voltage, frequency, and amperage ratings are listed on the product rating plate.
Record the model and serial numbers before installing the Pro wall ventilation hood. Both numbers are listed on the rating plate, located on the left wall of the hood shell.
L I S T O F M AT E R I A L S
The following is a list of materials shipped with the Wolf Pro wall ventilation hood.
Stainless steel wall hood
Transition with backdraft damper (attached inside
Decorative stainless steel rail and installa- tion
Control
(610)deep hoods, three for 27" (686) deep hoods
Filters and grease cups (installed in hood)
(10) #10 x 2" (51)
(10)
Installation package (taped to filters)
Installation Instructions
Use & Care Information and product registration card
Wolf logo nameplate
(R) Rail Option
24" (610) Wall Hood
24" (610) Wall Hood
(R) Rail Option
27" (686) Wall Hood
Model Number
Serial Number
Dimensions in parentheses are in millimeters unless otherwise specified.
27" (686) Wall Hood
(R) Rail Option
3
