Wolf W302210I O W E R W I R I N G, Dimensions for BLOWER-90REM, Dimensions for BLOWER-120REM

I N S TA L L AT I O N I N S T R U C T I O N S

IN - LINE A N D REMOTE B L O W E R S

B L O W E R W I R I N G

IMPORTANT NOTE: Refer to the specific installation instructions provided with each blower for additional wiring instructions.

Follow wiring instructions at the blower as outlined in the specific installation instruc- tions provided with each blower. Black (L1) to black, white (neutral) to white, or white to blue, or white to brown (depending on model) and green to grounding screw. Run blower cable (ROMEX) to the hood.

Insert 6" (152) of ROMEX cable through the knockout opening and into the electrical box on the rough-in plate of the hood. Secure the cable to the electrical box with an appropriate connector.

Locate the cord assembly provided with the blower. The cord assembly has two leads, black (L1) and white (neutral). Connect these leads to the leads from the blower, black to black and white to white.

Connect all green and bare wires together to the ground screw in the electrical box.

Plug the cord assembly into the receptacle located near the center of the hood shell. Use the clips on the interior of the hood to keep excess power cord away from moving parts.

Reinstall the electrical box cover and screws in the upper right-hand corner of the hood. Make sure that all wires are secure and that no wires are pinched between the cover and box.

IMPORTANT NOTE: Before turning the power on to the ventilation hood, make sure the blower is off.

When making electrical connections, make sure the electrical power is turned off at the power source or circuit breaker before proceeding.

		203/4"
281/4"		(527)
(718)	10" (254)
	Diameter
151/2"		241/2"
(394)
		(622)
	14"
	(356)
	243/4"	43/4"
		(121)
	(629)

Dimensions for BLOWER-90REM

Dimensions in parentheses are in millimeters unless otherwise specified.

	18" (457)
	10"
291/2"	(254)
(749)
10" (254)
Diameter
143/4"	1
(375)	29 /2"
	(749)
101/8"
(257)
22"	71/4"
(559)	(184)

Dimensions for BLOWER-120REM

	21" (533)
	10"
291/2"	(254)
(749)
10" (254)
Diameter
143/4"	291/2"
(375)
	(749)
103/8"
(264)
25"	71/4"
(635)	(184)

Dimensions for BLOWER-150REM

19