Wolf W302210I C E S S O R I E S, Installation C O N S I D E R AT I O N S, C T C O V E R

A C C E S S O R I E S

Optional acces- sories are available through your Wolf dealer. To obtain local dealer information, visit the Locator section of our website, wolfappliance.com.

W O L F PRO WALL VENTILATION H O O D S

INSTALLATION C O N S I D E R AT I O N S

Wolf Pro wall ventilation hoods are recommended for use with all Wolf cooking appliances.

IMPORTANT NOTE: For optimal performance, a Pro 27" (686) deep wall hood is recom- mended for use with ranges and rangetops that contain a charbroiler or griddle.

Proper installation is the responsibility of the installer. Product failure due to improper installation is not covered under the Wolf Warranty. Refer to the Wolf Pro Ventilation Hoods Use & Care Information for warranty details, or visit the Contact/Help section of our website, wolfappliance.com.

Make sure you have the tools and materials necessary for proper installation.

Warranty service must be performed by a Wolf authorized service center. Wolf is not responsible for service required to correct a faulty installation.

IMPORTANT NOTE: Wolf Pro ventilation hoods are shipped without the blower assembly. Wolf internal, in-line and remote blower assemblies are available, refer to page

20.Use only a Wolf blower with the Pro wall ventilation hood.

IMPORTANT NOTE: Wolf recommends that the Pro wall ventilation hood be installed 30" (762) to 36" (914) above the countertop.

Rail option (R) wall hoods come with a classic stainless steel decorative rail and stand-offs. Optional platinum or brass rails are available to match Wolf dual fuel range bezels. Contact your Wolf dealer for details.

E L E C T R I C A L R E Q U I R E M E N T S

Wolf Pro wall ventilation hoods require a separate, grounded 110/120 V AC, 60 Hz power supply. The service should have its own 15 amp circuit breaker. Locate the electrical supply within the shaded area shown in the Installation Specifications illustration for your specific wall hood on page 6.

You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.

D U C T C O V E R

If you are installing a Wolf duct cover with the wall hood, refer to instructions on page 21 before installing the hood.

R E C I R C U L AT I N G K I T

If you are installing the accessory recirculating kit, refer to the instructions included with the kit before installing the hood.

4