Woods Equipment HC48, HC54, HC72, HC60 Dealer Service, Universal Joint Repair, U-JointDisassembly

UNIVERSAL JOINT REPAIR

1.Yoke

2.Cup and bearing

3.Snap ring

4.Journal cross

Figure 22. Universal Joint Parts Breakdown

U-Joint Disassembly

1.Remove external snap rings from yokes in four locations as shown in Figure 23.

Figure 23. Remove Snap Ring

2.With snap rings removed, support drive in vise, hold yoke in hand and tap on yoke to drive cup up out of yoke. See Figure 24.

Figure 24. Remove Cups

3.Clamp cup in vise as shown in Figure 25 and tap on yoke to completely remove cup from yoke. Repeat Step 2 and Step 3 for opposite cup.

Figure 25. Remove Cups

4.Place universal cross in vise as shown in Figure 26 and tap on yoke to remove cup. Repeat Step 3 for final removal. Drive remaining cup out with a drift and hammer.

(Rev. 6/27/2008)

MAN0670 (11/16/2007)

Dealer Service 29