Bolt rebound pad (28) to rebound pad support (27). Insert bolt (9) through gearstand and bracket (26), then place rebound pad assembly on top and secure with lock nuts (10).
Attach tailwheel arm brackets (19) to brackets on rear of cutter frame with bolts (22) and elastic stop nuts (21).
Attach tailwheel assembly (20) and hitch stop (17) to tailwheel mounting bracket (26) with clevis pin (25) and secure with two cotter pins (32). Attach tailwheel arm brackets (19) to tailwheel assembly (20) with bolt (18) and elastic stop nuts (21).
Attach one end of each support brace (5) to the gear- stand with bolts (9) and lock nuts (10). Insert hitch pins
(1)through mast plates (2). Place
Place spacer (13) between brackets on lift channel (12) and mount between lower hole of
Attach rear universal joint shield (31) to gearstand with bolts (29) and nuts (39).
OPTIONAL LEAF MULCHER
INSTALLATION
Loosely assemble the leaf mulcher to the cutter before tightening any hardware.
The mulcher uses the chain shielding attachment holes. It is your option to remove or leave the chain shielding in place.
Place adapter (4) underneath the front edge of cutter and attach with bolts (6) and flange lock nuts (7).
Bolt front shield (3) to adapter using bolts (6) and flange lock nuts (7).
Place rear mulcher section (1) underneath the rear edge of cutter and attach with bolts (6) and flange lock nuts (7).
Attach right and left side frames (2 & 5) to the front and rear mulcher sections with bolts (6) and flange lock nuts (7). The slots are to the front and the
When all hardware is installed, you may tighten it.
7
7
CD3837
|
| 5 |
|
|
|
| 1 |
|
|
| 6 |
|
|
| 6 |
| 6 |
|
|
1. | Rear mulcher section | 3 | 6 |
2. | Left side frame |
| |
|
| ||
3. | Front shield | 7 | 7 |
4. | Adapter |
| |
4 | 2 | ||
5. | Right side frame |
|
6. 1/2 x 1" Bolt
7. 1/2" Lock nut
7
6
Figure 27. Optional Leaf Mulcher Installation
34 Assembly | 15914 (Rev. 5/11/2007) |
|
|
