Woodstock W1667 manual

Image 35

Woodstock W1667 instruction manual

Contents

81⁄2 Oscillating Drill Press Page Contents About Your W1667 8 1⁄2 Oscillating Drill Press Woodstock Service and Support Specifications Warranty and Returns Disconnect machine when cleaning, adjusting or servicing Standard Safety Instructions Keep proper footing and balance at all times Additional Safety Instructions for Drill Presses Never drill while holding Workpiece by hand Avoiding Potential Injuries Extension Cords 110V OperationGrounding Box Contents Assembly Dust Port To install the base and column, do these stepsTo install the dust port, do these steps Base and Column Loosely installing table lock lever To install the table, do these steps Aligning the pocket in the headstock With the column Headstock Handles To install the drill chuck, do these stepsTo install the handles, do these steps Drill Chuck Belt Tension To adjust the drive belt tension, do these steps Feed Shaft Spring Tension To adjust the feed shaft spring tension, do these steps Hold the spring cover tightly Quill-Shaft Screw Support table while loosening lock Table Height / Tilt Loosening the lock knob Drilling Speed Drilling Depth Drill Press RPM ChartTo adjust the drilling depth, do these steps Adjustments Adjustments Starting the Drill Press Operations To change drill bits and sanding drums, do these steps Drill/Drum Changes Remove the spindle handles Using the OscillatorTo use the oscillating feature, do these steps Sanding drum installed Sanding Sleeves GeneralTable and Base Lubrication Troubleshooting Parts Diagram Parts List Drill Press Accessories Drill Press Accessories Warranty Card BOX BELLINGHAM, WA