W1730 Oscillating Edge Sander

Maintenance Schedule

Every 2 Hours of Running Time: Clean and lubricate table top, miter slot and fence.

Every 3 Hours of Running Time: Check belt tracking. Check sanding belt condition.

• Every 6-8 Hours of Running Time:

Replace belt.

• Every 2,000 hours:

Replace the rubber V-Belt (recommended). Check the

 

eccentric and spindle connector. Lubricate all oil ports and

 

grease fittings, rack and pinion gear, and check gear box.

Maintenance Notes

DATE

MAINTENANCE PERFORMED

MAINTENANCE

-25-

Page 27
Image 27
Woodstock W1730 manual Maintenance Schedule, Maintenance Notes, Every 6-8 Hours of Running Time, Every 2,000 hours