-24-
W1752 Owner's Manual (Mfg. 1/07+)
OPERATIONS
Figure 25. Typical sanding operation.
Sanding/Finishing
After turning, the workpiece can be sanded, as shown
in Figure 25, and finished (in the same manner) before
removing it from the lathe.
Sandpaper
Workpiece

ENTANGLEMENT HAzARD!

Wrapping the sandpaper com-
pletely around the workpiece can
pull your hands into the moving
workpiece and may cause injury.
Never wrap sandpaper complete-
ly around the workpiece!
Whenever sanding or finishing, move the tool rest holder
out of the way to increase personal safety and gain ade-
quate working room.