Worth Data 7000 manual Parameters line, position, prompt, FG, BG

InputKeyBd

Parameters: line, position, prompt, shifted, timestamped

InputKeyBdColor (15-line terminal only)

Parameters: line, position, prompt, shifted, timestamped,FG,BG

Function: This instructs the ActiveTerminal to display the prompt at line and position and wait for data to be entered from the terminal keypad only. If shifted is set to “true”, the terminal will start in shifted mode. Timestamped appends a (hhmmss) prefix to the returned data.

InputExtKeyBd

Parameters: line, position, prompt

InputExtKeyBdColor (15-line terminal only)

Parameters: line, position, prompt, FG, BG

Function: This instructs the ActiveTerminal to display the prompt at line and position and wait for data to be received from the PS/2 keyboard attached using an adaptor to the terminal serial port. Waiting for external keyboard input can be bypassed by pressing the enter key on the terminal which will send an empty data string to the host (fires the OnTermData event handler). External keyboards are supported by terminals using firmware version RFU1010 or later.

InputScanner

Parameters: line, position, prompt, allowbreakout, timestamped

InputScannerColor (15-line terminal only)

Parameters: line, position, prompt, allowbreakout, timestamped,FG,BG

Function: This instructs the ActiveTerminal to display the prompt at line and position and wait for data to be entered from the terminal scanner only. Setting allowbreakout to true allow user to "break out" of scanner only mode by pressing the end key on the terminal. A termID+CR will be sent to the host.

InputYesNo

Parameters: line, position, prompt

InputYesNoColor (15-line terminal only)

Parameters: line, position, prompt,FG,BG

Function: This instructs the ActiveTerminal to display the prompt at line and position and wait for a Yes (Enter key or C key) or a No (0 key or B key) from the terminal keypad.

Note: C and B keys are used to facilitate keypad entry while scanning with the integrated laser.

InputPassword

Parameters: line, position, prompt, shifted

InputPasswordColor (15-line terminal only)

Parameters: line, position, prompt, shifted,FG,BG

Function: This instructs the ActiveTerminal to display the prompt at line and position and wait for data to be entered from the terminal keypad only. The entered data is not displayed on the terminal.

InputSerial

Parameters: line, position, prompt

InputSerialColor (15-line terminal only)

Parameters: line, position, prompt,FG,BG