Introduction
The 7001 RF Terminal is a low cost,
•Low Cost
•Up to 3.3 mile range, LOS (10 x the competition)
•64 Terminals per Base Station
•Spread Spectrum frequency hopping avoids interference
•No license required in USA and Canada
•Small size, (5.9" L, 3.6" W, 1.0" D) even with laser
•Certified to multiple 5 ft. drops to concrete
•Long Battery Life (15 hours of usage)
•Fast Recharging
•No programming necessary on terminal
•Host communication thru
•User Customizable Voice Prompting plus Display
•Backlit Color TFT Display Standard
•Uses
The RF Terminal maintains software compatibility with applications written for the older generation T71/LT71 and T701/LT701 RF Terminals. Differences are noted below.
Differences
While the new 7000 series RF Terminals are fully software compatible with the older 70 and 700 series terminals, there are a few differences between them. The differences between the older generation of Worth Data RF Terminals and the generation referred to within this manual are:
•64 Terminals per Base Station instead of 16. Valid Terminal ID's are
•Valid Channels are
•Base Station parameters (Baud Rate, Parity, Security Code, etc) are not set through the Terminal, but rather set with a Windows program.
•The maximum number of characters that can be sent to a Base Station by a host program is 231 instead of the old 247.