Xerox 150 manual Accessing the Twain Interface, Open the Twain Interface from One Touch

Scanning with the TWAIN Interface

Accessing the TWAIN Interface

Each TWAIN-compliant software application has its own specific steps to open the TWAIN interface, but the basic process is the same for most of them.

Open the TWAIN Interface from One Touch:

If the One Touch configuration you’re using to scan is set to Configure Before Scan, and the selected option is TWAIN, the TWAIN interface opens when you press a button on your scanner without opening another application first.

For example, the following figure shows the options you would have selected for button 9 to open the TWAIN interface.

Open the TWAIN Interface from an Application:

Each TWAIN-compliant software application has its own specific steps to open the TWAIN interface, but the basic process is the same for most of them.

1.Open a TWAIN-compliant scanning application.

2.Use that application’s command to open the TWAIN interface.

In PaperPort click on the toolbar Scan button then choose TWAIN: Xerox DocuMate 150 when prompted. Select Display scanner dialog box, then click on the Scan button in the scanning pane.

Many Microsoft Office applications can access the TWAIN interface from the Insert menu, by choosing Picture then From Scanner or Camera.

The TWAIN interface opens and you’re ready to start scanning.

DocuMate 150 Scanner User’s Guide 59