11Mbps Wireless Internet Broadband Router
2.2 Installing the Router
This section will discuss what you should do before connecting your router to the network and how to physically install it.
2.2.1 Preparing for Installation
Before you start to connect your router to any network device, make sure you get the following values from your ISP. You will need those values to setup the Router and configure you networked PCs to accept the IP address the Router chooses to assign them.
PPPoE User Name and Password
or
Fixed Internet IP Address assigned by your local ISP Your Subnet Mask
Your Default Gateway
Your Primary DNS IP address
or
Other values may be needed for Cable Modem users, please confirm with your
ISP
You are supposed to have all those information mentioned above from your ISP. If not, contact your ISP and they will be able to supply all the information you need.
12
