Xerox 2314 PPPoE Connection for WAN, User Name and Password, Service Name, Connect on Demand

11Mbps Wireless Internet Broadband Router

Figure 3-3The “Home” page of the Utility Menu Screen

3.2.1 PPPoE Connection for WAN

If your ISP uses PPPoE (Point-to-Point Over Ethernet) to establish communications with end-users, you will receive information such as User Name and Password from them. To set up a PPPoE connection for WAN, follow the instructions as shown in Figure 3-4 Cable/DSL Setup Menu Screen and Figure 3-5 Cable/DSL Setup Menu with “No” Option Screen. Then, you need to configure the following values to make your router work. (See Figure 3-6 PPPoE Menu Screen)

-User Name and Password

Fill in the entries with the information you get from your ISP.

-Service Name

If your ISP provides this info, please type it into the field.

-Connect on Demand

If you have been disconnected due to inactivity, Connect on Demand will enable you to establish a connection again between your Router and ISP.

16