Xerox 2314 manual Getting Started

11Mbps Wireless Internet Broadband Router

2.2.2 Getting Started

You may complete the following steps to install your Wireless Internet Broadband Router when you have all the information mentioned above on hand.

Step 1. Power all devices down. This should include your PCs, Cable or DSL modem and the Router.

Step 2. Connect the Router to your PCs.

A. Connect one end of a standard network cable to the 10/100 RJ-45 LAN ports on the back of the Wireless Access Point Router.

B. Connect the other end of the cable to the PC.

Step 3. Connect the Router to your Cable or DSL modem.

A.Connect one end of a standard network cable to the RJ-45 WAN port on the back of the Wireless Access Point Router.

B.Connect the other end of the cable to either a Cable or DSL modem

Step 4. Supply the power to the Router.

A.Connect one end of the power cable to the Wireless Access Point Router.

B.Connect the power cube end of the power cable to a standard wall outlet.

When the Router receives power, the Power LED should remain solid Green.

Step 5. Supply the power to either your Cable or DSL modem.

Step 6. Press the Reset button to restore the Wireless Access Point Router‘s default settings. Hold the button in for three seconds, or until the Diag LED illuminates red.

13