![](/images/new-backgrounds/1124316/12431641x1.webp)
SECTION 1
INTRODUCTION
General Information
The AGILE 6287 ALLY PLUS is a
The coax port allows a standard IBM RG62 A/U cable to connect to an IBM 3174 or 3274 establishment controller (EC) with a category A device adapter, a 3276 terminal controller unit, or an IBM CPU with a Display Printer Adapter (DPA).
By using the ALLY PLUS,
The ALLY PLUS also may be attached to plotters, rasterizers, bar code printers and other output devices that support parallel or serial interfacing, although this manual will refer to the attached device as a printer.
Supported Printer Interfaces and Character Sets
The ALLY PLUS supports the following printer interfaces and character sets:
•
•
•ASCII, EBCDIC or APL character sets
IBM Port
The ALLY PLUS connects directly to the IBM establishment controller, or equivalent CPU with a Display Printer Adapter, through an IBM standard coaxial cable.
Alternate Host Feature
The ALLY PLUS has been designed to support up to three alternate host devices. This allows the mainframe and the alternate host(s) to share the printer(s) without the necessity of an A/B switch.