Page | 6287 ALLY PLUS User’s Manual |
To reset an individual configuration parameter to its factory default setting, enter the trigger, the Option number and the terminator. The following example resets the top margin for SCS data streams:
!ALLY!13;
A General Configuration Report with default values selected can be found in the Appendix. The user can print the current General Configuration Report at any time using Mode 5 from the front panel.
Changing Configuration Options Within a Print Job
If the user intends to make configuration changes within a coax host print job, Option #12 — SCS right margin and Option #22 — DSC right margin should be set to 00 (infinite line length), Option #14 — SCS bottom margin and Option #24 — DSC bottom margin should be set to 00 (infinite page length), and Option #70 — DisplayWrite 370 support should be set to 00 (disabled). Otherwise, unpredictable formatting errors could occur.
