Xerox 6287 Pseudo Transparency Mode PTM Selection, Discard PTM Terminating Delimiter, DSC Trigger

Page 11-8 6287 ALLY PLUS User’s Manual

30 — Pseudo Transparency Mode (PTM) Selection

This option is equivalent to ALLY PLUS Option #62. A value of “A” is executed as though it were an ALLY PLUS value of 02, and a value of “B” is executed as an ALLY PLUS value of 01. The General Configuration Report will display either “0=disabled,” “1=one trigger method” or “2=two trigger method.”

Note: Since the ULTRA does not provide the option of disabling pseudo transparency, pseudo transparency cannot be disabled with an ULTRA configuration command.

31 — Discard PTM Terminating Delimiter

This option is equivalent to ALLY PLUS Option #67. A value of “Y” is executed as though it were an ALLY PLUS value of 01, and a value of “N” is executed as an ALLY PLUS value of 00. The General Configuration Report will display “yes” or “no.”

Note: The default value of the ULTRA is “No.” The ALLY PLUS default value is “Yes.”

32 — DSC Trigger 1

This option is the equivalent of ALLY PLUS Option #63.

33 — DSC Trigger 2

This option is the equivalent of ALLY PLUS Option #64.

34 — SCS Trigger 1

This option is the equivalent of ALLY PLUS Option #65.

35 — SCS Trigger 2

This option is the equivalent of ALLY PLUS Option #66.

36 — Reserved

This option is reserved in the current ULTRA firmware, and it has no equivalent in the ALLY PLUS.