![](/images/new-backgrounds/1124316/124316265x1.webp)
6287 ULTRA COMPATIBILITY | Page |
24 — Reserved
This option is reserved in the current ULTRA firmware, and it has no equivalent in the ALLY PLUS.
25 — Centronics or Dataproducts Parallel
This option has no equivalent in the ALLY PLUS, because the ALLY PLUS supports only Centronics parallel interfacing.
26 — Intervention Required
If this option is set to a value of “N,” ALLY PLUS Option #52 is set to 00. The General Configuration Report will display a “0.” If this option is set to “Y,” the setting of ALLY PLUS Option #52 is determined by ULTRA Option #27.
27 — Intervention Required Delay
If ULTRA Option #26 is set to “Y,” the setting of this option determines the value of ALLY PLUS Option #52. The ULTRA decimal value is executed as though it were the equivalent ALLY PLUS hexadecimal value. The General Configuration Report will display the decimal number of minutes selected by this option.
Note: The smallest delay allowed by the ALLY PLUS is 1 minute, while the ULTRA can send an Intervention Required message immediately. If the ULTRA configuration command is set to 0 (immediate), it is executed as though it were an ALLY PLUS value of 01 (1 minute).
28 — Reserved
This option is reserved in the current ULTRA firmware, and it has no equivalent in the ALLY PLUS.
29 — Reserved
This option is reserved in the current ULTRA firmware, and it has no equivalent in the ALLY PLUS.