Xerox 6287 user manual Function Options

Page 5-4 6287 ALLY PLUS User’s Manual

Function Options

The following table describes all valid non-zero values in a function table.

Afunction value of zero (00) in the table indicates a one-for-one translation of a source character to a printable character. A non-zero value has special meaning. Note that an asterisk (*) indicates that the function is applied only when rows and columns are being counted (i.e., when Option #70 — DisplayWrite 370 is enabled). Items in italics apply only to the ASCII from ASCII table when programming the unit from an alternate host.

Value	Meaning
01	End of message*
02	Send a form feed and clear the line count*
03	Send new line and clear column count*
04	Vertical channel select (SCS only)* or ASCII hex data

05Send CR and clear column count*

06Treated as null or ASCII numeral

07Bell character (see Option #75)

08Move left one space in print buffer*

09Tab right to next tab stop*

0A	Send line feed and add to line count*
0B	Send line feeds until next vertical tab stop*
0C	— reserved for future use —
0D	— reserved for future use —
0E	Add to line count*
0F	— reserved for future use —

10Escape handler (SCS 2Bxx) or ASCII semicolon (;)

11— reserved for future use —

12Pseudo transparency trigger

13— reserved for future use —

14Graphic escape (SCS only)

15IBM 35h transparency trigger (SCS only)

16Xerox 36h transparency trigger (SCS only)

17— reserved for future use —

18Display field switch ON

19Display field switch OFF or ASCII asterisk (*)

1A	Character is ignored or ASCII dollar sign ($)
1B	UDK triggeror ASCII Y/N
1C	Xerox font trigger (‘i’)
1D	UDK definition trigger (‘=’)
1E	ALLY PLUS program mode trigger (‘!’)
1F	Pass character w/o translation or ASCII percent sign (%)