Xerox 6287 user manual PFS Descriptions

Page 4-4 6287 ALLY PLUS User’s Manual

PFS Descriptions

The ALLY PLUS can store up to 64 PFSs in a dynamic 12K space. The following is a complete list of PFSs currently offered. A description of when each PFS is triggered by the host application is included, although PFSs also can be triggered by the user at any time.

%00 — Power On

When the ALLY PLUS receives printable data for the first time after power up or RESET, or when this PFS is triggered directly by the user, this PFS is sent to the printer.

%01 — Printer Reset

This PFS resets the printer.

%02 — Bolding On

If DisplayWrite 370 is enabled and the ALLY PLUS detects the sequence [character-backspace-same character], this PFS will be sent to the printer. Note: This is not used when DisplayWrite 370 is disabled (see Option #70) unless it is triggered directly by the user.

%03 — Bolding Off

If bolding was on previously, and if a [character-non-backspace] sequence is detected, this PFS is sent to the printer. Note: This is not used when DisplayWrite 370 is disabled (see Option #70) unless it is triggered directly by the user.

%04 — Overstriking On

If a [character-backspace-different character] sequence is detected, this PFS is sent to the printer. Note: This is not used when DisplayWrite 370 is disabled (see Option #70) unless it is triggered directly by the user.

%05 — Overstriking Off

If overstriking was on previously, and if a [character-character] sequence is detected, this PFS is sent to the printer. Note: This is not used when DisplayWrite 370 is disabled (see Option #70) unless it is triggered directly by the user.