Tape Client overview
Tape job accounting
The Tape Client maintains a job log file, which contains accounting data for each job. You can view and print this log.
Information is logged in the accounting file during processing at the following times:
•At the end of each file, the following information is logged:
–Time stamp
–Data blocks read
–Completion status of the file
•At the end of the print job, the following information is logged:
–Time stamp
–Completion status of the job
–Valid tape mounts
–Total data blocks read
–JDL and JDE names
–Queue name
–Tape file ID
The Job Log is presented in table format, with one line for each job ID.
Tape dump
You can request a tape dump (a printout of all the tape contents) in order to troubleshoot a job. You print the dump by making the appropriate specifications on the Tape Client window on the DP EPS controller, setting up a queue with the required properties, and running the tape job.
The tape dump is formatted in ASCII and is sent to the controller and printed by the ASCII decomposer.
Refer to “Starting and ending an offline dump session,” in chapter 2, “Managing and printing jobs from the tape client.”
Tape Client Job Submission Guide |
