Manuals / Xerox / Computer Equipment / Printer

Xerox 701P21110 manual Managing the tape drive, 3.Rename Device window

Models: 701P21110

1 48

Download 48 pages 24.36 Kb

Page 42

Managing the tape drive

Managing the Tape Client

Managing the tape drive

In the Input Device group box on the Tape Client window, you can initiate the following tasks to manage the tape drive from which you are sending jobs.

Renaming a tape If you have more than one tape drive connected to your printer, drive you must select the drive that you want to use to send the job.

When the printing system is installed and your tape drives are configured on it, the system names them “Tape 0,” “Tape 1,” etc. If you want to assign a different name to a tape drive, follow these steps:

1.On the Tape Client window, select the drive that you want to rename from the Device menu.

2.Click Rename.... The Rename Device window opens, displaying in the Old Name field the name of the drive that you selected.

Figure 3-3. Rename Device window

3.In the New Name text field, enter the name you want to give the tape drive.

4.Click OK. The Rename Device window closes, and the new drive name is displayed on the Device menu.

NOTE: The renaming of the tape drive applies to the Tape Client window, not to the DocuSP window.

3-4	Tape Client Job Submission Guide

Image 42

Xerox 701P21110 manual Managing the tape drive, 3.Rename Device window

Contents

job submission guide Xerox Document Services PlatformTape client OctoberPrepared by Xerox Corporation Table of contents Table of contents Safety Laser safetyOperation safety: U. S Ozone information: U. S. onlyOperation safety: Europe 1-800-828-6571Warning markings Operator accessible areas Electrical supplyVentilation Maintenance Before cleaning your productCE mark: Europe only Certification to 1999/5/EC Radio Equipment and Telecommunications Terminal Equipment DirectiveEurope:+44 1707 USA:1 800 Canada:1 800 SafetyFor further information Tape Client Job Submission GuideSafety Tape Client Job Submission GuideIntroduction About this guideConventions DocuPrint 2000 Series 100/115/135/155/180 EPS DocumentationIntroduction Tape Client Job Submission GuidePrinting customer documentation 1.Tape Client overview Features and capabilitiesTape Client capabilities Supported tape formats Functional overview Streaming and spooling transmission modesJob and tape status reporting Tape job accounting Tape dumpJob recovery Host computer tape formats Tape codesRecord formats Offline dump Record structureOffline dump format2.Managing and printing jobs from the Tape Client Overview of the printing processManaging and printing jobs from the Tape Client Figure 2-1.Tape Client windowTape Client Job Submission Guide Figure 2-2.End of Job field on Tape Client window Preparing to print a tape job Importing resource filesManaging and printing jobs from the Tape Client Managing and printing jobs from the Tape Client Tape Client Job Submission GuideFigure 2-5.Popup menu with Import selected Specifying files for printingSpecifying the JDL, JDE, and form to start a job Figure 2-6.Document field on Tape Client window Figure 2-7.Job Descriptor Library window Figure 2-8.Confirmation window Controlling input for tape jobsEnding a job Moving over files on a tapeFigure 2-9.Move Tape Mark window Moving over blocks on a tape Figure 2-10.Move Block windowStarting and ending tape dump sessions 3.Managing the Tape Client Accessing the Tape ClientSetting up the printer for offline printing Figure 3-1.Printer setup window Adding a printerModifying a printer Figure 3-2.Modify Printer windowDeleting a printer Managing the tape drive Figure 3-3.Rename Device windowManaging the tape job accounting log 2.Click Rewind or UnloadViewing the job log Printing the job log Figure 3-4.Job Log window2.Click Print Log Managing the Tape Client Tape Client Job Submission GuideManaging the Tape Client Tape Client Job Submission GuideIndex