Safety
Ozone information: U. S. only
This product produces ozone during normal operation. The amount of ozone produced depends on copy volume. Ozone is heavier than air. The environmental parameters specified in the Xerox installation instructions ensure that concentration levels are within safe limits. If you need additional information concerning ozone, call
Operation safety: U. S.
Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements. They have been approved by safety agencies, and they comply with environmental standards. Please observe the following precautions to ensure your continued safety.
WARNING
Improper connection of the equipment grounding conductor may result in risk of electrical shock.
•Always connect equipment to a properly grounded electrical outlet. If in doubt, have the outlet checked by a qualified electrician.
•Never use a ground adapter plug to connect equipment to an electrical outlet that lacks a ground connection terminal.
•Always place equipment on a solid support surface with adequate strength for its weight.
•Always use materials and supplies specifically designed for your Xerox equipment. Use of unsuitable materials may result in poor performance and may create a hazardous situation.
•Never move either the printer or the controller without first contacting Xerox for approval.
•Never attempt any maintenance that is not specifically described in this documentation.
•Never remove any covers or guards that are fastened with screws. There are no
•Never override electrical or mechanical interlocks.
vi | Tape Client Job Submission Guide |
