Managing and printing jobs from the Tape Client
Figure 2-7. Job Descriptor Library window
4.On the resources list, click the name of the JDL, JDE, or form that you want to use for the job. Your selection appears in the
5.Click OK. The library window closes, and the name of the resource that you selected appears in the
field on the Tape Client window.
NOTE: If you selected a new JDL, a window displays the following message when you click OK:
You may have to select a new JDE entry.
When you click OK to close the message window, the Job Descriptor Entry library window opens. Select an initial JDE from this window, then click OK to close it.
6.Repeat steps 3 through 5 for any other initial resources that you want to specify.
Tape Client Job Submission Guide |
