Disassembly and Reassembly

3.10 SMPS

1.Before you remove the Fuser, you should remove:

-Top Cover(see page 3-2)

-Engine Shield Ass’y(see page 3-6)

2.Unplug one connector and remove three screws then take the Inlet Ass’y out.

Inlet Bracket

3.Remove one screw and unplug one connector from the Main PBA.

4. Remove three screws and take The SMPS out.

SMPS

Service Manual

3-7

Page 17
Image 17
Xerox Phaser 3120 specifications Smps