Disassembly and Reassembly
3.11 Transfer Roller
1.Before you remove the Fuser, you should remove:
-Top Cover(see page
-LSU(see page
2.Remove three screws and take the Transfer Earth out.
Transfer |
Earth |
3.Unplug the PTL Holder Connector, then remove the PTL Holder and PTL Lens, as shown below.
| PTL |
PTL | Lens |
Holder |
|
4.Unlatch the Bush and remove it. Then lift the Transfer Roller out, as shown below.
Transfer |
Roller |
Bush |
