Disassembly and Reassembly
3.12 Feed Roller
1.Before you remove the Fuser, you should remove:
-Top Cover(see page
-Drive Ass’y(see page
2.Remove two screws from the Guide Paper and take it out.
Guide paper |
3.Pull up the Feed Idle Bush and Feed Idle Shaft, as shown below.
Feed Idle |
Shaft |
Bush |
4.Remove three screws from the Feed Bracket and take it out.
Feed Bracket |
5. Remove the Idle Gear and Feed Gear2.
Feed Gear2 |
Idle Gear |
6.Remove the Feed Gear 1 Ass’y, as shown below.
Feed Gear1 |
Ass'y |
7.Remove the Feed Roller and Feed Roller 1, as shown below.
Feed Roller |
Feed Roller1 |
Service Manual
