TROUBLESHOOTING
4.4.6 Cover Open
• Description | The ERROR lamp is on even when the print cover is closed. | ||
| Check and Cause |
| Solution |
1. The Hook Lever in the top cover may be defective. | 1. | Replace the hook lever, if defective. | |
2. Check the connector (Engine B’d↔ HVPS) and circuit of | 2. | Check the insertion of the Cover Open S/W | |
the cover switch department in the Main Control board. |
| Connect. | |
Perform DCU mode : If Error state '64' occurs, Check the |
|
| |
related codes of the Cover Open Error. |
|
| |
|
| 3. | Replace the Main Control board or Cover Open |
|
|
| S/W. |
4.4.7 No lamp on when the cover is open
• Description | The ERROR lamp does not come on even when the printer cover is open | ||
|
|
|
|
| Check and Cause |
| Solution |
|
|
| |
1. Check the connector(CN8) and circuit of the cover switch | 1. | Check the insertion of the Cover Open S/W | |
department in the Main Control board. Perform DCU |
| Connect. | |
mode : If Error state '64' occurs, Check the related codes |
|
| |
of the Cover Open Error |
|
| |
|
| 2. | Replace the Main Control board or Cover Open |
|
|
| S/W. |
|
|
|
|
Service Manual
