Disassembly and Reassembly
3.4 Exit Roller
1.Before you remove the Fuser, you should remove:
-Top Cover(see page
2.Remove the Exit Gear, Bearing and Exit Roller.
Exit Gear |
Bearing |
Exit Roller |
1 |
2 |
3.5 LSU
1. Before you remove the Fuser, you should | 4. Unplug two connector from the LSU |
remove: |
|
- Top Cover(see page |
|
2. Remove two screws and unplug one connector from the Frame.
3. Remove the LED PBA Ass’y as shown below.
| LED PBA Cover |
Service Manual |
5. Unplug four screws and take the LSU out.
LSU |
