Yamaha 6L2-28199-1L Warning system, CAUTION:, Tilt support bar, Overheat warning, Tilt lock mechanism, Top cowling lock lever(s) (turn type)

Basic components

ZMU04111 ZMU03699

EMU30530

Tilt lock mechanism

The tilt lock mechanism is used to prevent the outboard motor from lifting out of the water when in reverse gear.

1

ZMU03695

1. Tilt lock lever

To lock it, set the tilt lock lever in the lock po- sition. To release, push the tilt lock lever in the release position.

EMU26330

Tilt support bar

The tilt support bar keeps the outboard motor in the tilted up position.

EMU26372

Top cowling lock lever(s) (turn type)

To remove the engine top cowling, turn the lock lever(s) and lift off the cowling. When installing the cowling, check to be sure it fits properly in the rubber seal. Then lock the cowling again by returning the lever(s) to the lock position.

1 ZMU03701

1. Top cowling lock lever(s)

EMU26801

Warning system

ECM00090

CAUTION:

Do not continue to operate the engine if a warning device has activated. Consult your Yamaha dealer if the problem cannot be located and corrected.

EMU26813

Overheat warning

This engine has an overheat warning device.

15