Operation
cool.
4.Third through tenth hours:
Avoid operating at full throttle for more than 5 minutes at a time. Let the engine cool between
5.After the first 10 hours:
Operate the engine normally. Use the standard premix ratio of gasoline and oil. For details on mixing fuel and oil, see
page 20.
EMU27101
Preoperation checks
EWM00080
WARNING
If any item in the preoperation check is not working properly, have it inspected and repaired before operating the outboard motor. Otherwise an accident could occur.
ECM00120
CAUTION:
Do not start the engine out of water. Overheating and serious engine damage can occur.
EMU27110
Fuel
●Check to be sure you have plenty of fuel for your trip.
●Make sure there are no fuel leaks or gaso- line fumes.
●Check fuel line connections to be sure they are tight (if equipped Yamaha fuel tank or boat tank).
●Be sure the fuel tank is positioned on a se- cure, flat surface, and that the fuel line is not twisted or flattened, or likely to contact sharp objects (if equipped Yamaha fuel tank or boat tank).
EMU27120
Oil
●Check to be sure you have plenty of oil for
your trip.
EMU27130
Controls
●Check throttle, shift, and steering for prop- er operation before starting the engine.
●The controls should work smoothly, with- out binding or unusual free play.
●Look for loose or damaged connections.
●Check operation of the starter and stop switches when the outboard motor is in the
water.
EMU27140
Engine
●Check the engine and engine mounting.
●Look for loose or damaged fasteners.
●Check the propeller for damage.
EMU27233
Filling fuel and engine oil
EMU27242
Filling fuel for portable tank
EWM00060
WARNING
Gasoline and its vapors are highly flammable and explosive. Keep away from sparks, cigarettes, flames, or other sources of ignition.
1.Remove the fuel tank cap.
2.Fill the fuel tank carefully.
3.Close the cap securely after refueling. Wipe up any spilled fuel.
Fuel tank capacity (if equipped Yamaha fuel tank):
24L
20