Yamaha 6L2-28199-1L Stopping engine, WARNING, Procedure, Reverse (manual tilt and hydro tilt models)

Operation

N

F

ZMU03718

Remote control models

1.Pull up the neutral interlock trigger (if equipped) and move the remote control lever quickly and firmly from neutral to

forward.

EMU27795

Reverse (manual tilt and hydro tilt models)

EWM00190

WARNING

When operating in reverse, go slowly. Do not open the throttle more than half. Otherwise the boat could become unstable, which could result in loss of control and an accident.

Tiller control models

1.Place the throttle grip in the fully closed position.

ZMU02030

2.On models equipped with a tilt lock le- ver, check that it is in the lock/down po-

sition.

ZMU03719

3.Move the gear shift lever quickly and firmly from neutral to reverse.

R

N

ZMU03720

Remote control models

1.Check that the tilt lock lever is in the lock position.

2.Pull up the neutral interlock trigger (if equipped) and move the remote control lever quickly and firmly from neutral to

reverse.

EMU27820

Stopping engine

Before stopping the engine, first let it cool off for a few minutes at idle or low speed. Stopping the engine immediately after operating at high speed is not recommended.

EMU27832

Procedure

1.Push and hold the engine stop button until the engine comes to a complete stop.

26