Trouble Recovery
EMU29422
Troubleshooting
A problem in the fuel, compression, or ignition systems can cause poor starting, loss of power, or other problems. This section describes basic checks and possible remedies, and covers all Yamaha outboard motors. Therefore some items may not apply to your model.
If your outboard motor requires repair, bring it to your Yamaha dealer.
If the engine trouble warning indicator is flashing, consult your Yamaha dealer.
Starter will not operate.
Q. Is battery capacity weak or low?
A. Check battery condition. Use battery of recommended capacity.
Q. Are battery connections loose or corrod- ed?
A. Tighten battery cables and clean battery terminals.
Q. Is fuse for electric start relay or electric circuit blown?
A. Check for cause of electric overload and repair. Replace fuse with one of correct am- perage.
Q. Are starter components faulty?
A. Have serviced by a Yamaha dealer.
Q. Is shift lever in gear?
A. Shift to neutral.
Engine will not start (starter operates).
Q. Is fuel tank empty?
A. Fill tank with clean, fresh fuel.
Q. Is fuel contaminated or stale?
A. Fill tank with clean, fresh fuel.
Q. Is fuel filter clogged?
A. Clean or replace filter.
Q. Is starting procedure incorrect? A. See page 23.
Q. Has fuel pump malfunctioned?
A. Have serviced by a Yamaha dealer.
Q. Are spark plug(s) fouled or of incorrect type?
A. Inspect spark plug(s). Clean or replace with recommended type.
Q. Are spark plug cap(s) fitted incorrectly? A. Check and
Q. Is ignition wiring damaged or poorly con- nected?
A. Check wires for wear or breaks. Tighten all loose connections. Replace worn or broken wires.
Q. Are ignition parts faulty?
A. Have serviced by a Yamaha dealer.
Q. Is engine stop switch lanyard not at- tached?
A. Attach lanyard.
Q. Are engine inner parts damaged? A. Have serviced by a Yamaha dealer.
Engine idles irregularly or stalls.
Q. Are spark plug(s) fouled or of incorrect type?
A. Inspect spark plug(s). Clean or replace with recommended type.
48