Operation

N

ZMU02024

ZMU03714

3.If a steering friction adjuster is provided on your outboard motor, securely attach the fuel line to the fuel line clamp.

NOTE:

During engine operation place the tank hori- zontally, otherwise fuel cannot be drawn from the fuel tank.

4.Squeeze the primer pump with the outlet end up until you feel it become firm.

ZMU02025

EMU27490

Starting engine

EMU27505

Manual start models (tiller control)

1.Place the gear shift lever in neutral.

NOTE:

The start-in-gear protection device prevents the engine from starting except when in neu- tral.

2.Attach the engine stop switch lanyard to a secure place on your clothing, or your arm or leg. Then install the lock plate on the other end of the lanyard into the en-

gine stop switch.

EWM00120

WARNING

●Attach the engine stop switch lanyard to a secure place on your clothing, or your arm or leg while operating.

●Do not attach the lanyard to clothing that could tear loose. Do not route the lanyard where it could become entan- gled, preventing it from functioning.

●Avoid accidentally pulling the lanyard during normal operation. Loss of en- gine power means the loss of most steering control. Also, without engine power, the boat could slow rapidly. This could cause people and objects in the boat to be thrown forward.

23