E
503015
502011
EMC60010
TILLER HANDLE
(for Tiller control model)
Moving the tiller handle sideways to adjust the steering direction.
EMC64010
Throttle Friction Adjustment (for Tiller control model)
A friction device in the tiller handle provides resistance to movement of the throttle grip. This is adjustable for operator preference. An adjusting screw/bolt is located within the tiller handle.
To increase the resistance:
Turn the adjusting screw/bolt clockwise. To decrease the resistance:
Turn the adjusting screw/bolt counter- clockwise.
When constant speed is desired, tighten the adjusting screw/bolt to maintain the desired throttle setting.
w
Do not overtighten the friction adjusting screw/bolt. If there is too much resis- tance, it may be difficult to move the throttle grip, which could result in an accident.