Yamaha 15A, 9.9A STEERING FRICTION ADJUSTMENT, TRIM ANGLE ADJUSTING ROD, TILT LOCK MECHANISM (for Manual tilt model), (for Tiller control model)

E

	EMD00010
	STEERING FRICTION ADJUSTMENT
	(for Tiller control model)
	A friction device provides resistance to
	steering movement. This is adjustable for
	operator preference.
	An adjusting screw/bolt is located on the
	swivel bracket.
408011	To increase the resistance:
	Turn the adjusting screw/bolt clockwise.
	To decrease the resistance:
	Turn the adjusting screw/bolt counter-
	clockwise.

404013**

q402014*

w

Do not overtighten the friction screw/bolt. If there is too much resis- tance, it may be difficult to steer, which could result in an accident.

EMU01297

TRIM ANGLE ADJUSTING ROD

The position of the trim angle adjusting rod determines the minimum trim angle of the outboard motor in relation to the transom.

EMD44110

TILT LOCK MECHANISM (for Manual tilt model)

The tilt-lock mechanism is used to prevent reverse thrust from the propeller lifting the outboard motor when reversing. To lock it, set the tilt-lock lever in the Lock position. To release it, place the tilt-lock lever in the Tilt position.

1Tilt-lock lever

2-6