
E
MAINTENANCE CHART
Frequency of maintenance operations may be adjusted according to the operating con- ditions, but the following table gives general guidelines.
The mark (●) indicates the
| Interval |
| Initial | Every | Refer | ||
|
| 10 hours | 50 hours | 100 hours | 200 hours | ||
|
| Page | |||||
Item |
| (3 months) | (6 months) | (1 year) | |||
|
|
|
| ||||
Spark plug | Cleaning/Adjustment/ | 7 |
| 7 | 7 |
| |
Replacement |
|
| |||||
Greasing points | Greasing |
|
|
| 7 |
| |
Gear oil | Change | 7 |
|
| 7 |
| |
Fuel system | Inspection |
|
|
| 7 |
| |
Fuel filter | Cleaning/Inspection | 7 |
| 7 | 7 |
| |
Fuel tank *1 | Cleaning |
|
|
|
| 7 | |
Idling speed | Adjustment |
|
|
| 7 |
| |
Anode | Inspection/Replacement |
|
| 2 | 2 |
| |
Outboard motor | Inspection |
|
| 7 | 7 |
| |
exterior |
|
|
| ||||
|
|
|
|
|
|
| |
Cooling water passages | Cleaning |
|
| 7 | 7 |
| |
Propeller and cotter pin | Inspection/Replacement |
|
| 7 | 7 |
| |
|
|
| |||||
|
|
|
|
|
|
| |
Carburetor setting | Inspection/Adjustment | 2 |
|
| 2 |
| — |
Ignition timing | Inspection/Adjustment | 2 |
|
| 2 |
| — |
Bolts and nuts | Retightening | 2 |
|
| 2 |
|
*1. If a portable fuel tank is equipped.
NOTE:
Cooling water passages;
When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.